Four wooden playing card holders made from fir on a white background, with two holding face-up cards and two empty holders showing the three-slot design.
Front view of a wooden playing card holder made from fir, with face-up cards visible in three tiered rows.
Infographic showing a wooden playing card holder with cards at staggered heights in three tiered slot depths for easier visibility and organization. Playing cards not included.
Close-up end view of a wooden playing card holder made from fir, with cards inserted into three angled slots of different depths, showing slot spacing and beveled profile.
Infographic showing an 11-inch wooden playing card holder with approximate dimensions of 11 inches long by 2 inches wide by 1.5 inches high for compact storage and packing.
Three-quarter front view of a wooden playing card holder made from fir, with face-up playing cards spread across three angled slots.
Two wooden playing card holders made from fir on a white background, one holding face-up cards and one empty to show the three-slot construction.
Angled view of a wooden playing card holder made from fir, holding face-up playing cards in three tiered angled slots on a white background.
Empty wooden playing card holder made from fir, showing natural wood grain, beveled edges and three parallel card slots on a white background.
Rear three-quarter view of a wooden playing card holder made from fir, with red-backed playing cards positioned in three angled slots.
Close-up end profile of an unfinished wooden playing card holder made from fir in the workshop, showing three angled slots of different depths and the beveled profile.
Stack of unfinished wooden playing card holders made from fir beside a table saw, showing three-slot construction, beveled profiles and natural wood grain.
Workshop view of wooden playing card holders being made in batches, with unfinished fir holders stacked in front and the maker working at a table saw.
Four wooden playing card holders made from fir on a white background, with two holding face-up cards and two empty holders showing the three-slot design.
Front view of a wooden playing card holder made from fir, with face-up cards visible in three tiered rows.
Infographic showing a wooden playing card holder with cards at staggered heights in three tiered slot depths for easier visibility and organization. Playing cards not included.
Close-up end view of a wooden playing card holder made from fir, with cards inserted into three angled slots of different depths, showing slot spacing and beveled profile.
Infographic showing an 11-inch wooden playing card holder with approximate dimensions of 11 inches long by 2 inches wide by 1.5 inches high for compact storage and packing.
Three-quarter front view of a wooden playing card holder made from fir, with face-up playing cards spread across three angled slots.
Two wooden playing card holders made from fir on a white background, one holding face-up cards and one empty to show the three-slot construction.
Angled view of a wooden playing card holder made from fir, holding face-up playing cards in three tiered angled slots on a white background.
Empty wooden playing card holder made from fir, showing natural wood grain, beveled edges and three parallel card slots on a white background.
Rear three-quarter view of a wooden playing card holder made from fir, with red-backed playing cards positioned in three angled slots.
Close-up end profile of an unfinished wooden playing card holder made from fir in the workshop, showing three angled slots of different depths and the beveled profile.
Stack of unfinished wooden playing card holders made from fir beside a table saw, showing three-slot construction, beveled profiles and natural wood grain.
Workshop view of wooden playing card holders being made in batches, with unfinished fir holders stacked in front and the maker working at a table saw.

Wooden Playing Card Holders Set of 4 – Bridge, Canasta & Game Night

$44.99

Wooden playing card holders set of 4, handcrafted from hand-selected premium-grade fir and finished with clear shellac. Each holder has three angled, open-ended slots that keep cards upright, visible, and easy to organize around a standard game table.

  • Includes 4 matching card holders
  • Approximately 11″ L × 2″ W × 1.5″ H each
  • Three tiered, open-ended card slots
  • Best all-around set for bridge, canasta, and family game night
  • Veteran-made in Cottage Grove, Oregon
  • Playing cards are not included

2 in stock

SKU: ATT-W0020 Category: Tags: , , , , , , , , , , , , , , ,

Wooden Playing Card Holders Set of 4 – Handmade 3-Slot Card Racks

Make card games easier to see, sort, and enjoy with this set of 4 wooden playing card holders from Kip’s Wood Shop. Each handmade wooden card rack keeps cards upright and organized without requiring players to hold a full hand throughout the game.

Every holder is made from one solid piece of hand-selected premium-grade fir. Three angled, open-ended slots run lengthwise across the base, allowing cards to slide in, slide out, and move side to side as players add, remove, or rearrange them.

Three-Slot Design for Easier Card Play

The tiered slot layout separates cards into three visible rows. The back slot is shallowest, the middle slot is slightly deeper, and the front slot is deepest, creating a clear front-to-back view. Open ends allow cards to move naturally across the rack instead of being trapped in individual compartments.

The shaped wooden profile includes full-length bevel cuts along the top front edge, bottom front edge, and bottom back edge. The top back edge remains square. This creates a stable tabletop base with a clean, finished profile.

Product Specifications

  • Quantity: Set of 4 matching card holders
  • Material: Hand-selected #2 Premium Grade fir dimensional lumber
  • Construction: One solid piece of wood per holder
  • Finish: Clear shellac for a smooth feel and light everyday protection
  • Dimensions: Approximately 11″ L × 2″ W × 1.5″ H each
  • Weight: Approximately 0.62 lb each
  • Slot configuration: Three open-ended angled slots with tiered depths
  • Slot width: Approximately 1/8″
  • Card compatibility: Standard playing cards and most common card-game decks
  • Made in: Cottage Grove, Oregon, USA

Playing cards are not included.

Best for Family Game Night, Bridge, and Canasta

This set of 4 wooden playing card holders is the best all-around choice for family game night, bridge, canasta, and most standard card tables. The racks support easier card organization while keeping the table neat and the cards visible.

  • Family game nights and standard four-player tables
  • Bridge, canasta, Hand and Foot, rummy, Uno, and Five Crowns
  • Kids learning to organize and read cards
  • Grandparents and players who prefer hands-free card support
  • Gifts for card players, hosts, and game-loving families

Veteran-Made in Oregon

Each holder is cut, shaped, sanded, and finished in small batches at Kip’s Wood Shop in Cottage Grove, Oregon. Boards are selected for straightness, clean surfaces, attractive grain, and minimal defects before production begins.

Natural differences in grain, tone, and small surface details are normal in real wood. These variations make every handmade set slightly different while the dimensions, slot layout, and finish remain consistent.

Care, Processing, and Shipping

  • Wipe clean with a dry cloth.
  • Do not soak, place in a dishwasher, or use harsh cleaners.
  • Store in a dry location away from excessive heat or moisture.
  • Orders normally ship from Cottage Grove, Oregon, within 1–3 business days.
  • Shipping is calculated at checkout based on package size, weight, and destination.

Choose the Right Set

  • Set of 2: Best for couples, kids, gifts, two-player games, and smaller games.
  • Set of 4: Best all-around option for family game night, bridge, canasta, and most card tables.
  • Set of 10: Best for senior centers, classrooms, therapy groups, bridge clubs, activity programs, and larger groups.

Frequently Asked Questions

What size cards fit these holders?

They are designed for standard playing cards and work with most common card-game decks. Very thick, oversized, or heavily sleeved cards may fit differently.

How many slots does each holder have?

Each holder has three angled, open-ended slots with tiered depths. Cards can slide from side to side while staying separated into visible rows.

What wood and finish are used?

Each rack is made from hand-selected #2 Premium Grade fir dimensional lumber and finished with clear shellac for a smooth feel and light everyday protection.

Where are the holders made?

Every set of 4 is veteran-made in small batches at Kip’s Wood Shop in Cottage Grove, Oregon.

Are playing cards included?

No. Playing cards shown in product photographs are for demonstration only.

Why is the set of 4 the best all-around choice?

Four holders cover most standard card tables and family games while giving each player a matching three-slot rack.

Do you offer other set sizes?

Yes. The active product family includes the Set of 2 and Set of 10, with the same materials, construction, slot layout, and finish.

Weight2.75 lbs
Dimensions12 × 4 × 4 in

Reviews

There are no reviews yet.

Be the first to review “Wooden Playing Card Holders Set of 4 – Bridge, Canasta & Game Night”

Related products

Ten wooden playing card holders made from fir on a white background, with two holding face-up cards and eight holders stacked behind them.

Game Accessories

Wooden Playing Card Holders Set of 10 – Clubs, Classrooms & Groups

$94.99
Two wooden playing card holders made from fir, showing the three-slot tiered card rack design.

Game Accessories

Wooden Playing Card Holders, Set of 2 – 3-Slot Tiered Card Racks

$27.99